VES1724-55C
24-port Temperature-Hardened VDSL2 Box DSLAM Compact and Full-featured VDSL2 Technology
Compliant with ITU-T G.993.2, G994.1, G.997.1, G.998.4 G.inp, and G.993.5 vectoring
The VES1724-55C conforms to G.993.2, G994.1 G.997.1, G.998.4 G.inp, and G.993.5 vectoring to ensure the interoperability with standard-compliant VDSL CPE.
Ultra high-speed transmission with 17a profile support
The VES1724-55C supports 17a profile with 100 Mbps in downstream traffics. With two Gigabit combo ports to connect upper layer aggregation networks, the VES1724-55C can support low-concentration interconnection from the subscriber ports to the network interface ports.
Triple Play ready
The VES1724-55C supports IGMP snooping to prevent unnecessary forwarding of multicast traffic to all subscribers and thus optimizes bandwidth utilization for multicast applications such as broadcast video.The VES1724-55C also supports the multicast VLAN feature that distributes the source to all the VLANs requesting the video stream. With a built-in splitter over POTS, the VES1724-55C allows the operators to provide Triple Play services over the same copper wire.
Complete QoS for service differentiation
The VES1724-55C supports not only 802.1X port-based access control for subscriber authentication, but also defines a limited number of MAC addresses that can access the network from a particular port. With rate limiting on the subscriber ports allowing services to take advantage of 64 Kbps increments, service providers will be in a better position to offer tiered services.
Product Description
Application Diagram
Specification
System Specification
- 16K MAC addresses
- 256 static MAC address filtering
- Port security
- Broadcast/Multicast/Destination lookup fail storm control
- Spanning tree protocol (IEEE 802.1D)
- QoS (IEEE 802.1P, 8 priority queues)
- Port-based and tag-based (IEEE 802.1Q) VLAN
- GVRP for automatic VLAN membership registration
- Link aggregation (IEEE 802.3ad)
- IGMP snooping / Proxy
- MVR
- RMON
- SNMP
- MIB II, RFC1493, 2674 and 1757 MIB, and private MIB
- Web management
- FTP for firmware upgrade
- CLI through Console port and telnet
- IPv6
- VDSL2 bonding
- ADSL2+ fallback & bonding
- G.INP (G.998.4)
- Vectoring (G.993.5)
Hardware Specification
- 1U
- 19” rack mountable
- Front access:
One Telco 50 for 24 VDSL ports
One Telco 50 for 24 POST ports
2-slot 100/1000 Mbps Ethernet uplink/downlink
2-slot Gigabit fiber uplink/downlink (Combo)
Built-in POTS splitter supports 600 ohm ETSI & 900 ohm ANSI
- AC and DC dual power (Power redundancy)
AC input: 100 VAC to 264 VAC, 60 Hz ±3 Hz
DC input: -36 VDC to -72 VDC
- Power consumption: 63 watts
Physical Specification
Item dimensions (WxDxH):
440 x 250 x 44.35 mm (17.32″ x 9.84″ x 1.75″)
Item weight: 4,700g (10.36 lb.)
Packing dimensions (WxDxH):
550 x 395 x 175 mm (21.65″ x 15.55″ x 6.89″)
Packing weight: 5,300 g (11.68 lb.)
Environment Specification
Operating Environment
Temperature: -40°C to 65°C (-40°F to 149°F)
Humidity: 10% to 95% (Non-condensing)
Storage Environment
Temperature: -40°C to 70°C (-40°F to 158°F)
Humidity: 5% to 95% (Non-condensing)
Certification
- RoHS
- K.20
- ETSI300-019
- Safety
EN60950-1
CSA60950-1
UL60950-1
IEC60950-1
- EMC
FCC Part 15 Class A
EN55022 Class A
ETSI300-386
Reviews
There are no reviews yet.